Önder Fan designs and manufactures silo aeration fans for grain silos, flat stores and feed mills. Each fan is sized to your silo, grain type and floor system, then built and tested in our Bursa factory.
Stored grain is a living product. Temperature differences inside a silo cause moisture to migrate, which leads to hot spots, condensation, mould, insects and loss of quality. A correctly sized silo aeration fan pushes or pulls cool ambient air evenly through the grain mass to keep its temperature uniform and low.
The result is grain that keeps its quality for months, fewer losses during storage and less need for turning or chemical treatment. For silo operators, feed mills and grain traders, aeration is one of the most cost-effective investments in a storage plant.

Every storage plant is different. We select the fan type by the static pressure of your grain bed, the required airflow and the way the fan connects to the silo.
For tall silos and deep grain beds where higher static pressure is needed. Robust steel housings for continuous outdoor operation.
For lower pressure applications such as shallow beds and flat storage, where high airflow is needed at low resistance.
High-capacity fans for grain dryers and cooling systems, supplied as single units or fan batteries.
Fans can be supplied for pressure (blowing) or suction aeration, with transition pieces and ducting to suit your silo connection. Explore our full range of industrial fans.
The right fan is not chosen from a catalogue. It is calculated from your silo and your grain. Typical aeration airflow rates range roughly from 5 to 20 m³/h per tonne of grain, depending on the product and whether the aim is cooling or drying. Grain type, bed depth and floor system determine the static pressure the fan must overcome.
Silo diameter and height, capacity, grain type and aeration floor or duct system.
We calculate the required airflow and the static pressure of the grain bed.
We select the impeller, motor power and housing for the best efficiency at your duty point.
The fan is manufactured, balanced and tested in Bursa before shipment.

Aeration is only one part of a healthy grain store. Önder Fan also supplies dust collection and filtration systems for grain intake pits, silo tops, conveyors and cleaning machines, together with cyclones, ducting and rotary airlock valves.
Working with one manufacturer for fans and filtration means one engineering team, matched equipment and simpler service. See examples in our project gallery.
Fans are designed and built in our own 8,500 m² facility in Bursa, Türkiye, with an annual production capacity of around 2,500 tonnes.
More than two decades of experience in industrial fans and filtration, with in-house design, simulation and testing.
We supply silo builders, feed mills and grain storage operators at home and abroad, with export packing and documentation.

It moves ambient air through the stored grain to cool it, keep its temperature even and prevent moisture migration, which protects grain quality during storage.
It depends on the grain type, silo size and the goal of aeration. Cooling aeration typically uses lower airflow per tonne than drying. Send us your silo data and we will calculate it for you.
Centrifugal fans are preferred for tall silos and deep grain beds with higher static pressure. Axial fans suit low-pressure applications such as shallow beds and flat stores.
Yes. Önder Fan manufactures in Bursa, Türkiye and ships silo aeration fans to customers in other countries.
Yes. We also design and build dust filters, cyclones and ducting for grain intake, silo tops and conveying lines.
Send us your silo dimensions, capacity and grain type. Our engineers will size the right aeration fan and send you a quote.